Fix loose car battery connection

Ways to Recondition a Cars And Truck Battery

Do not give up on your vehicle battery just yet; there’s a technique that is able to repair your vehicle battery and make it usable again.

Yup.

Exactly what if I told you …

You could just keep the exact same battery, restore it, and save lots of cash?

The good news is, you can with a procedure called battery reconditioning. Fix loose car battery connection

There are secrets which Tom Exposes here, but will go over the fundamentals of ways to recondition your automobile battery.

Here’s a secret video on how to recondition your automobile battery from Tom.

ez battery reconditioning

If you didn’t take a look at the tricks, then pay close attention and learn the best ways to revivify your battery.

Here’s the following steps:

  1. Switch off your car – permit cooling to occur for around an hour
  2. Lift hood, then remove the battery( utilize a wrench to detach the negative wire prior to the favorable one).
  3. Careful to make sure that your wrench is not touching other metal parts or electrical shock can occur.
  4. After disconnecting wires, get rid of the battery from the car.
  5. Now, detach the plastic caps that are on top of the battery cells. Listed below, you will see where the cells have been sealed.
  6. Run a power drill to make a hole in these marks( cover eyes with googles).
  7. Equip gloves, turn battery upside down and get rid of contents of the cell.
  8. Gradually include little amounts of baking soda to the container. This neutralizes the liquid.
  9. Repeat the step above for all cells.
  10. Now, blend one part Epsom salt into three parts of warm, pure water.
  11. There ought to be a quart of this solution for one cell.
    Pour the option onto the cells, shake it around for a bit and let it sit.Fix loose car battery connection

Here’s how you end up the job:.

Reconnect the three stage charger to the battery.
Guarantee that the battery is off– link the positive wire initially and after that the negative wire.
Set the battery charger to 12 Volts and change it on. Let charge for 12 hours.
Cover the drilled holes with replacement plugs and position the battery back into the hood and link it to the cables positive first).
Congrats, you simply saved and revived your battery!

Here is a video to help you comprehend the process much better:.

ez battery reconditioning

An alternative way to restore your car battery is with Epsom salt:

 

richard