How to replace car battery toyota matrix

Ways to Recondition a Cars And Truck Battery

Do not quit on your car battery just yet; there’s a technique that is able to repair your automobile battery and make it usable once again.

Yup.

What if I told you …

You could just keep the exact same battery, restore it, and conserve lots of cash?

The good news is, you can with a procedure called battery reconditioning. How to replace car battery toyota matrix

There are secrets which Tom Exposes here, however will discuss the basics of how to recondition your cars and truck battery.

Here’s a secret video on ways to recondition your vehicle battery from Tom.

ez battery reconditioning

If you didn’t have a look at the tricks, then pay attention and learn the best ways to revivify your battery.

Here’s the following steps:

  1. Switch off your car – enable cooling to happen for around an hour
  2. Lift hood, then remove the battery( use a wrench to detach the negative wire before the favorable one).
  3. Careful to make sure that your wrench is not touching any other metal parts or electrical shock can take place.
  4. After detaching wires, get rid of the battery from the vehicle.
  5. Now, detach the plastic caps that are on top of the battery cells. Below, you will see where the cells have been sealed.
  6. Run a power drill to make a hole in these marks( cover eyes with googles).
  7. Equip gloves, turn battery upside down and remove contents of the cell.
  8. Gradually add small quantities of baking soda to the container. This reduces the effects of the liquid.
  9. Repeat the action above for all cells.
  10. Now, blend one part Epsom salt into 3 parts of warm, pure water.
  11. There need to be a quart of this option for one cell.
    Pour the service onto the cells, shake it around for a bit and let it sit.How to replace car battery toyota matrix

Here’s how you finish up the task:.

Reconnect the three stage battery charger to the battery.
Guarantee that the battery is off– connect the positive wire initially then the negative wire.
Set the battery charger to 12 Volts and switch it on. Let charge for 12 hours.
Cover the drilled holes with replacement plugs and put the battery back into the hood and connect it to the cables positive first).
Congrats, you just conserved and revived your battery!

Here is a video to help you understand the procedure much better:.

ez battery reconditioning

An alternative way to restore your car battery is with Epsom salt:

 

richard